第1O期 李晓曼,等.入口含尘浓度变化对不同排气管结构PV型旋风分离器分离效率的影响 33 STUDY OF EFFECT OF FEED DUST CONCENTRATION oN SEPARATION EFFICIENCY OF PV TYPE CYCLoNE WITH DIFFERENT EXIT TUBES Li Xiaoman,Song Jianfei,Sun Guogang,Wei Yaodong (State Key Laboratory of Heavy Oil Processing,China University of Petroleum,Beijing 102249) Abstract:The feed dust concentration has an important influence on the separation efficiency and pressure drop of cyclone.In the range of dust concentration of 5—55O g/m。,the separation efficiency of 500 mm diameter PV cyclone with three different exit tubes was investigated using 325 mesh talcum powder.The exit tubes with small cylindrical(type A),cone(type B)and big cylindrical(type C)were used,respectively.The experimental results show that the separation efficiencies go up with increasing dust concentration in feed.However the separation efficiency increases smoothly when the feed concen— tration is above 1 5 0 g/m。.With increasing the feed concentration,the tangential velocity decreases and thereby the separation ability decreases.As the aggregation between particles increases,the inertia sep— aration ability rises,resulting in improved separation efficiency but more particles escaped.The experi— mental results also show that the exit tube structure of cyclone separator,especially the diameter,has a considerable effect on separation efficiency.Finally,according to the experiment date and considering the influence of inlet feed velocity and exit tube diameter,an empirical equation for calculating separa— tion efficiency of cyclone iS given. Key Words:cyclone;feed concentration;separation efficiency;exit tube structure :::::::::::::::: :::::::::::::::::: :::::::::: 也—地— — —书 乙烷裂解成乙烯,裂解反应所需的热量来自甲烷转化反应 8简 讯q x 1x ‘x — ‘— } 放出的热量。这种设计使反应器的给料既可以是天然气 也可以是乙烷,同时最大化地节约了能源。 全球首套甲烷直接生产乙烯装置开工 [中国石化有机原料科技情报中心站供稿] 最近,美国Siluria技术公司在得克萨斯州的甲烷直接 高效甲醇转化制丙烯项目立项 生产乙烯试验装置已经开工运行,因此成为全球首家将天 然气直接工业化大规模转化为乙烯的企业。新路线或将 神宁集团公司承担的国际科技合作专项——高效甲 给传统的以石油为原料的乙烯行业带来重大变革。 醇转化制丙烯过程合作研究,近日获科技部立项批复。该 甲烷的选择活化和定向转化是世界级难题,因而从20 项目的实施将极大推动MTP技术的发展,为大规模甲醇 世纪8O年代至21世纪初,学界始终没能开发出工业上可 制丙烯技术的升级应用及大型煤化工项目的节能降耗奠 行的甲烷直接制乙烯工艺。该技术突破的关键在于催化 定基础。 剂,2010年,Siluria公司创造性地使用生物模板精确合成 据悉,该项目由神宁集团公司联合浙江大学、宁夏大 纳米线催化剂,使用高通量技术从大量备选催化剂中筛选 学和德国伊尔姆瑙理工大学(Teehnisehe Universit/it I1一 出最合适的元素组成,开发出工业上可行的甲烷直接制乙 menau)共同申报,实施年限为3年,以神宁集团已建成的 烯催化剂。该催化剂可在低于传统蒸汽裂解法操作温度 两套500 kt/a煤基甲醇制丙烯(MTP)装置为依托,针对催 20O~300℃的情况下,在5~10 arm(1 atm一1.013×10 化剂积炭失活、MTP工艺全流程、多层次节能技术和新型 Pa)下,高效催化甲烷转化成乙烯,其活性是传统催化剂的 催化剂制备工艺等内容开展研究。 100倍以上。Siluria公司设计的反应器分为两部分,一部 分用于将甲烷转化成乙烯和乙烷,另一部分用于将副产物 [中国石化有机原料科技情报中心站供稿]