2432-10资料

Frontier Electronics Corp.

667 E. COCHRAN STREET, SIMI VALLEY, CA 93065TEL: (805) 522-9998FAX: (805) 522-99E-mail: frontiersales@frontierusa.comWeb: frontierusa.com

Insert Molded Coil—2432 series

A. Mechanical Drawing:

B. Electrical Specification:

Part No.

2432-092432-102432-112432-122432-132432-142432-152432-162432-172432-182432-192432-20

L Min. (uH)

0.3150.3550.3960.4330.4750.5150.5830.6380.6930.70.7920.847

L Nom. (uH)

0.3690.4160.4680.5090.5560.6040.6600.7200.7700.8140.8460.6

L Max. (uH)

0.4230.4770.00.5850.6370.6930.7380.8010.8460.8740.9000.945

Q Min. @ L Nom.

80 @ 40 MHz82 @ 40 MHz78 @ 40 MHz80 @ 40 MHz80 @ 40 MHz78 @ 40 MHz80 @ 40 MHz76 @ 40 MHz76 @ 40 MHz82 @ 40 MHz80 @ 40 MHz74 @ 40 MHz

Color

WhiteBlackBrownRedOrangeYellowGreenBlueVioletGrayWhiteBlack

C. Features:

1. Plastic molded.2. High reliability.3. Low cost.

1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the

bottom of the coil then bent ¼” down from stand off at an angle of 90°.2. L min. measured with core halfway out of the top of the form.

3. Inductance greater than 0.1uH read at recommended Q meter frequency.4. Inductance below 0.1uH calculated from readings taken at 50MHz.Q meter (HP 4342A)

Mar. 01, 2002 Page 1 of 1

D. Measurement:

E. Test equipment:

IMC 2432 series