真空泵

LAMB ELECTRIC

Model:

DESCRIPTION-Three stage-240 volts

-7.2\" / 183 mm diameter-Double ball bearings -Single speed

-Tangential bypass discharge-Aluminum fan end bracket-Aluminum top bracket

116136-00

DESIGN APPLICATION

-Equipment operating in environments requiring separation of working air from motor ventilating air

-Designed to handle clean, dry, filtered air only

TYPICAL MOTOR PERFORMANCE.*140VacSPECIAL FEATURES-Suitable for 240 volt AC operation, 50/60 Hz

-UL recognized, category PRGY2 (E47185)

-Provision for grounding

-10 mm shaft and bearing system-Epoxy painted fan case -Patented air seal bearing construction. U.S. Patent #4,088,424

-The Lamb Electric vacuum motor line offers a wide range of

performance levels to meet design needs

(At 240 volts, 60Hz, test data is corrected to standard conditions of 29.92 Hg, 68?F.)120Orifice(Inches)2.0001.7501.500Air Flow--CFMAmps6.96.96.97.06.96.96.96.86.56.15.65.14.7Watts(In)14146314671474146214611451143813861299119811031019RPM167691673816690166831665916673167341692617228179381885019876201Vac(In.H2O)3.35.59.517.624.033.245.159.474.788.7102.2114.9129.0Flow(CFM)97.395.692.687.682.977.068.757.945.131.419.08.90.0AirWatts386110318123430134043963272281200120Flow1008060Vacuum--Inches H2OASATA

1008060401.2501.1251.0000.8750.7500.6250.5000.3750.2500.000402000.0000.2500.3750.5000.7500.8751.1251.2501.7502.00050VacFlow2000.6251.000Orifice Diameter (Inches)35001.500Vacuum--MM H202000150010003025201510Air Flow--L/Sec.METRICDATA

3000250040Orifice(mm)48.040.030.023.019.016.013.010.06.50.0Amps6.96.96.96.96.86.56.15.75.14.7Watts(In)14581466146714143713881308121311081019RPM167551670416670167191693217216178671871319825201Vac(mm H2O)10821153610701517188222172429023277Flow(L/Sec)45.4.140.133.427.221.515.59.84.40.0AirWatts40210348404396334243125035500010.013.016.019.023.030.040.048.00.06.550Orifice Diameter (mm)Note: Metric performance data is calculated from the ASTM data above.

* Data represents performance of a typical motor sampled from a large production quantity. Individual motor data may vary due to normal manufacturing variations.Test Specs:240 voltsMinimum Sealed Vacuum:118.0\"ORIFICE:7/8\"Minimum Vacuum:39.0\"Maximum Watts:1630PRODUCT BULLETIN116136-00DIMENSIONSIMPORTANT NOTE:Pictorial and dimensional data are subject to change without notice. Contact factory for current revision levels.When using AMETEK Lamb Electric bypass motors in machines that come in contact with foam, liquid (including water),

or other foreign substances, the machine must be designed and constructed to prevent those substances from reaching the fan system, motor housing,and electrical components. Lamb Electric vacuum motors other than hazardous duty models should not be applied in machines that come in contactwith dry chemicals or other volatile materials. Failure to observe these precautions could cause flashing (depending on volatility) or electrical shockwhich could result in property damage and severe bodily injury, including death in extreme cases. All applications incorporating Lamb Electric motors should be submitted to appropriate organizations or agencies for testing specifically related to the safety of your equipment.

WARNING -

AMETEK Lamb Electric 627 Lake StreetKent, Ohio 44240U.S.A.Tel: (330) 673-3451Fax: (330) 673-94AMETEK GmbHDostojewskistrasse 10D-65187 WiesbadenGermanyTel: 49-0611-9210Fax: 49-0611-92110Issued: March, 1998

AMETEK Singapore Pvt. Ltd.10 Ang Mo Kio Street 65# 05-12 Techpoint Singapore 2056Tel: 65-484-2388Fax: 65-481-6588