SPS-8110WG资料

Optoway SPS-8110WG

SPS-8110WG / SPS-8110BWG (RoHS Compliant)

3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER FEATURES

l Up to 4.25 Gbps Bi-directional Data Links

l Hot-Pluggable SFP Footprint LC Optical Transceiver l Small Form-Factor Pluggable (SFP) MSA compatible l Compliance with Fibre Channel FC-PI 400/200/100-SM-LC-L

l SFF-8472 Digital Diagnostic Function l 1310 nm DFB LD Transmitter

l AC/AC Coupling according to MSA l Up to 10 km

l Single +3.3 V Power Supply l RoHS Compliant

l 0 to 70oC Operating : SPS-8110WG l -10 to 85oC Operating : SPS-8110BWG

l Class 1 Laser International Safety Standard IEC-60825 Compliant

1

***********************************************************************************************************************************************************************

**********************************************************************************************************************************************************************

DESCRIPTION

APPLICATIONS

l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel l 1.25 Gb/s 1000 BASE-LX Ethernet

ORDER INFORMATION

P/No.

Bit Rate (Gb/s) 4 / 2 / 1 4 / 2 / 1

FC-PI 400/200/100 400/200/100

Distance Wavelength (km) (nm) 10 10

The SPS-8110WG series single mode transceiver is small

form factor pluggable module for bi-directional serial optical data communications such as 4x/2x/1x Fibre Channel and 1000BASE-LX Ethernet. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

LASER SAFETY

This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

Package

Temp. (oC) 0 to 70 -10 to 85

TX Power RX Sens. RoHS (dBm) (dBm) Compliant -3 to -8 -3 to -8

-18 -18

Yes Yes

SPS-8110WG

SPS-8110BWG

1310 DFB LC SFP with DMI 1310 DFB LC SFP with DMI

Absolute Maximum Ratings

Parameter

Storage Temperature

Operating Case Temperature Power Supply Voltage

Symbol Tstg Topr Vcc

Min -40 0 -10 -0.5

Max 85 70 85 3.6

Units oC oC V

Notes

SPS-8110WG SPS-8110BWG

Recommended Operating Conditions

Parameter

Power Supply Voltage

Operating Case Temperature Power Supply Current Data Rate

Symbol Vcc Topr ICC (TX+RX)

Min 3.1 0 -10 1.0625

Typ 3.3 200

Max 3.5 70 85 300 4.25

Units / Notes

V

oC / SPS-8110WG o

C / SPS-8110BWG

mA Gb/s

***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/1/2006 V3.0

元器件交易网www.cecb2b.com

Optoway

Parameter

Symbol

SPS-8110WG

Min

Typ

Max

Units dBm µW nm nm dB ps dB/Hz µA µA V V V µs ms V V

Notes 1

-20 dB Width

20 % to 80%,unfiltered

Peak-to-Peak

2 2 3 3

2

***********************************************************************************************************************************************************************

Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)

Optical

Optical Transmit Power Po -8 --- -3 Optical Modulation OMA 290 --- --- Amplitude@4.25Gb/s Output Center Wavelength 1260 1310 1360 λ Output Spectrum Width --- 1 ∆λ Side Mode Suppression Ratio SMSR 30 Optical Rise / Fall Time tr /tf 90 (4.25Gb/s)

Relative Intensity Noise RIN -118 Electrical

Data Input Current – Low IIL -350 Data Input Current – High IIH 350 Differential Input Voltage VIH - VIL 0.5 2.4 TX Disable Input Voltage – Low TDIS, L 0 0.5 TX Disable Input Voltage – High TDIS, H 2.0 Vcc TX Disable Assert Time TASSERT 10 TX Disable Deassert Time TDEASSERT 1 TX Fault Output Voltage -- Low TFaultL 0 0.5 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.

3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).

Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)

Parameter

Optical

Sensitivity @4.25Gb/s Sensitivity @2.125 / 1.063Gb/s

Symbol Sens1 Sens2

Min

Typ

Max 29 -18 15 -20 -18 --- 1600

Units µW dBm µW dBm dBm dBm dBm dB nm

Notes

4 5 4 5

Transition: low to high Transition: high to low

Maximum Input Power Pin 0 Signal Detect -- Asserted Pa --- Signal Detect -- Deasserted Pd -30 --- Signal detect -- Hysteresis 1.0 --- Wavelength of Operation 1260 --- Electrical

Differential Output Voltage VOH – VOL 0.6 2.0 V Output LOS Voltage -- Low VOL 0 0.5 V 6 Output LOS Voltage -- High VOH 2.0 Vcc+0.3 V 6

74. Measured at PRBS 2-1 at BER 1E-12.

5. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29 µW is approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB. 6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).

***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/1/2006 V3.0

元器件交易网www.cecb2b.com

Optoway

SPS-8110WG

3

*********************************************************************************************************************************************************************** CONNECTION DIAGRAM

PIN

1 2 3 4 5 6 7 8 9 10

Signal Name

TX GND TX Fault TX Disable MOD-DFE2 MOD-DEF1 MOD-DEF0 N/C LOS RX GND RX GND

Description

Transmitter Ground

Transmitter Fault Indication

Transmitter Disable (Module disables on high or open)

Modulation Definition 2 – Two wires serial ID Interface

Modulation Definition 1 – Two wires serial ID Interface

Modulation Definition 0 – Ground in Module

Not Connected Loss of Signal Receiver Ground Receiver Ground

PIN

11 12 13 14 15 16 17 18 19 20

Signal Name Description

RX GND Receiver Ground

RX DATA OUT- Inverse Receiver Data Out RX DATA OUT+ Receiver Data Out RX GND Vcc RX Vcc TX TX GND

TX DATA IN+ TX DATA IN- TX GND

Receiver Ground

Receiver Power – 3.3V±5% Transmitter Power – 3.3V±5% Transmitter Ground Transmitter Data In

Inverse Transmitter Data In Transmitter Ground

Module Definition

Module Definition

4

MOD-DEF2 PIN 4 SDA

MOD-DEF1 PIN 5 SCL

MOD-DEF0 PIN 6 LV-TTL Low

Interpretation by Host Serial module definition

protocol

Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.

***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/1/2006 V3.0

元器件交易网www.cecb2b.com

Optoway SPS-8110WG Tx_DISABLETx_FAULT4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC VeeTTx_DISABLETx_FAULT(1,17,20)324.7K to 10KΩTD +LDDriver18Z=50ΩTD +100ΩTD -19TD -Z=50Ω1μH10nF10μF10nF1μH10μFVccT16Vcc 3.3VVccR1510nF10μFSerDesICProtocol ICRD -12Z=50Ω100ΩRD -POSTAmpRD +13Z=50Ω4.7K to 10KΩRD +depending on SERDESLOSS OF SINGALLOSVeeRMOD_DEF(0)8(9,10,11,14).7K to 10KΩVcc 3.3V4.7K to 10KΩMODULE DETECTSCLSDA4.7K to 10KΩEEPROMMOD_DEF(1)MOD_DEF(2)SFP module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/1/2006 V3.0